KayDrill 凯钻
Construction

From foundations to tunnels compressed air for every job

Foundation drilling, tunnelling, sandblasting, shotcrete, solar piling, slope anchoring and more — 11 applications served with matched, reliable air supply.

Electric air for foundation grouting and anchoring at a large hydropower project in southwest China

Featured

Electric air for foundation grouting and anchoring at a large hydropower project in southwest China

The project lies in a high mountain gorge. Dam foundation and slope treatment required anchor drilling and consolidation grouting at the same time, with many air points over a long schedule. The site is far from towns, so diesel had to be hauled in at high and uncertain cost; some faces were underground, where diesel exhaust adds to ventilation load; and diesel engines lose power at altitude.

All units run on the site grid, so diesel storage and haulage were eliminated; no exhaust in the caverns eased ventilation; and output was unaffected by thin air, avoiding the derating diesel units suffer at altitude. The units ran steadily through the main construction period and met the air demand for foundation and slope treatment.

Read the case study ›

Construction Applications

11 applications covering the main air demands of construction — from foundations and slopes to tunnels and solar farms

Sandblasting

Sandblasting

Surface preparation of hull blocks and steel structures needs high flow for long hours; oil content and pressure stability decide the finish

Shotcrete

Shotcrete

Shotcrete uses a lot of air at modest pressure — a classic low-pressure, high-flow duty where a matched unit saves power over a throttled high-pressure one

Foundation drilling

Foundation drilling

Foundation treatment and underground works at large hydropower projects often run several units in parallel, grouped by pressure for anchoring, grouting and hole cleaning

Geothermal drilling

Geothermal drilling

Designed depths beyond 1,500 m, with water from several zones on top of friction losses — we calculate the rated pressure from altitude and depth

Water well drilling

Water well drilling

Wells of 150–250 m through sandstone and weathered zones: dual-duty units cover high-pressure deep drilling and high-flow well development

Tunnelling

Tunnelling

Drilling, shotcreting and mucking alternate all day — the DMT Series' full-range variable-speed drive removes the idle running of fixed-speed units

Cable blowing

Cable blowing

Cable blowing needs steady medium-pressure, high-flow air; the work moves along the duct, often at night in town, so noise is the key concern

Solar pile drilling

Solar pile drilling

Solar mounting piles mean many holes and constant moves, usually without grid power; sand and big temperature swings test filters and protection

Slope anchoring

Slope anchoring

High-speed-rail cut slopes need deep anchor holes, often with casing through broken ground; the compressor sits at the toe, so hoses are long and losses high

Bridge piling

Bridge piling

DTH drilling and casing advance for bridge piles: large diameters and deep rock sockets need continuous high-flow, high-pressure air to clear the hole

Road construction

Road construction

Blast-hole drilling in mountain road cuts, slope work and urban road breaking — the unit moves with the working face